# Desktop Standing

## Adjust the bracket angle

Adjust the supporting bracket in the package to the angle as shown in the figure below

<figure><img src="/files/KUeK73SfsTwviD6cq43R" alt=""><figcaption></figcaption></figure>

## Place the device on the stand

Attach the magnetic surface of the desktop stand to the metal plate located at the center of the product's back. Ensure that the lower bracket supports the protruding part of the product's lower back. Then, place the product on the desktop at a slight tilt to ensure stability.

<figure><img src="/files/QbrgZm7MYGT2oSWqghMT" alt=""><figcaption></figcaption></figure>

<mark style="color:red;">**Note:**</mark> The bottom of the product must be in full contact with the desktop. Do not leave it suspended, as this may cause instability during use. The stand is designed only to provide angled support from the back, not to bear the full weight of the product.

<figure><img src="/files/X18IeZ7JxHQBwaaqLI6x" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://kb.linknlink.com/isg/getting-started/installing-isg-display/desktop-standing.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.