# Update from eHome

If you have the previous model eHome (not HA version), you can simply update the firmware to turn it to be eHome HA. Just click "..." > "Update to eHome HA" and proceed with the firmware update.

<div align="left"><figure><img src="/files/8xefgepa3CdY9GwLai7A" alt="" width="375"><figcaption></figcaption></figure></div>

During the firmware update, please monitor the LED indicator status. If the LED starts flashing intermittently (flashing four times, pausing once, then repeating), it means the device has been reset—this is expected after updating to the HA version.

At this point, you can either terminate the update process by closing the app on your phone or simply wait until a failure message appears.

Once done, set up the device again as a new product, and you will gain access to the MQTT for HA feature.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://kb.linknlink.com/kb/smart-home-devices/ehome-ha/update-from-ehome.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.