Start Home Assistant

1. Check the status of iSG Home Assistant.

   • When iSG first launches the HA service, it takes about 15 minutes to start up.

   • Check iSG - settings - HA services - the details page on the right should display "running."

   • Then, use the HA add-on to log in with the credentials (if you do not have a HA account, you can use the default system username and password: admin/admin to log in).

2. Access HA through iSG

• Access HA through the Opera browser in iSG:

  When the HA service status in Settings shows "Running", it means you can click on "iSG HA Service" below to enter HA(If you have not installed the HA APK, then by default, you will access HA through Opera from here).

• Access HA through the Home Assistant app within iSG

  In the iSG, click on the navigation bar on the left, select "Add-Ons," and then find the "Home Assistant" card to download and install the service.

After the installation is successful, click "open" to enter HA (Home Assistant).

Note:

In the HA App, do not click the back button. If you wish to exit the app, click the small round button in the center of the menu bar at the bottom of the screen.

3. Access HA through a PC browser

1) The PC must be on the same local network as the iSG.

2) Find the IP address of iSG.

3) Open a browser on the PC and enter "[IP address of iSG]:8123" to visit Home Assistant, for example, 10.10.10.227:8123.