📑Installation
Last updated
Last updated
When the device is not in setup mode, take out the reset pin and use it to press and hold the Reset Button for 5s until the LED indicator flashes intermittently.
A smartphone or tablet running iOS 9.0/Android 5.1 or above.
A 2.4GHz Wi-Fi network with Internetaccess.
Make sure the device is on and the blue LEDindicator is flashing intermittently
Connect your smartphone to your homeWi-Fi network (2.4GHz only). Open your phone's camera, point it at the QR code, download the latest "LinknLink' APP from the App Store or Google Play, and install it on your smart phone.
Open the LinknLink APP, click on the server selection in the top right corner, then click on "LinknLink Account" and log into your cloud account. If you don't have an account, click "Sign up'to create a new one.
Power on the eMotion, making sure the indicator light is Flashing intermittently in blue. Turn on your phone's Bluetooth service, clickon the "+" in the top right corner -"Add device" -"Add a new device"-"eMotion series device"-"eMotion". The APP will start to automatically scan for nearby eMotion devices, which may take up to 10 seconds.
Select your home Wi-Fi network, enter the password and click "Connect now"the LED indicator will flash slower and then turn off. Device is successfully connected. Choose a room and name the device!
In the LinknLink App, click on the eMotion device, you can check the real-time occupancy status (Person Detected, NoPerson or Continuous No Person) and quick history for last 24 hours. You can click "History Records" to view previous history for last 1 month.You can click'"...">“Export Data" and input your email to get a full history record.
You can set the "Security Time" and enable"Alert Notification" for intrusion alert. A warning sign will be displayed on devicepage, and you will also receive a push notification if person is detected during the security time.
For Android/i0S widgets, on the phone firstly find and select the LinknLink App widget. Then from the device card, select the human radar sensor. After adding the widget to the phone's home screen, long press on it to configure.
Click.">"Modbus" to set a fixed lPad dress for eMotion and find Modbus register address. Use your custom software to query current sensor status via Modbus TCP protocol.
If you're already logged into the Alexa or Google Home APP, you can now directly link to the LinknLink skill. On the App homepage, click on the "+" inthe top right corner and select "AddVoice Assistant "Select "Alexa" or "Google Home", then click"Link Now"
You will be redirected to the Alexa / GoogleHome App and click "Link" to complete this process. After successfully discovering the device. you will be able to control the device through the Alexa /Google Home APP or speaker.
Use the "Routines" in LinknLink App, the sensors in eHub can be used astrigger conditions, and the remote control can be used as execution device. Ex. turn off the heater when the room is continuously unoccupied Similarly, use the "Routine" in Alexa /Google Home to set up the automation you need.
