How to update Original iSG HA to 2024.10

Starting from this version, we have completely upgraded the container architecture of iSG. Subsequently, it will support continuous updates of iSG built-in Home Assistant to the latest version.

Note: Since this upgrade involves transitioning the Android system from 32-bit to 64-bit, it will not be possible to revert to Home Assistant after the upgrade. All devices added to HA will need to be re-added.

1. Backup iSG

Please refer to the iSG and Home Assistant backup guidance. https://kb.linknlink.com/isg/settings/backup

2. Flash iSG system image to 64-bit

Please refer to the iSG system flash image guidance. https://kb.linknlink.com/isg/settings/firmware-updates/flashing-isg-system-image

3. Install iSG Update

Please refer to the iSG Firmware Update guidance. Use iSG Opera browser visit https://kb.linknlink.com/isg/settings/firmware-updates/isg-software, Find V20130_x64 download link, download firmware and install it.

4. Install HA Container Update

Please refer to the HA Container Firmware Update guidance. Use iSG Opera browser visit https://kb.linknlink.com/isg/settings/firmware-updates/ha-container, Find V100205_x64 download link, download firmware and install it.

5. Restarting iSG, Setup HA 2010.10.4

Upon restarting iSG, the HA installation page will automatically pop up. If it does not appear automatically, please navigate to iSG settings - Local HA - Start Initialization.

The overall installation process will take approximately 40 minutes to an hour. Please do not disconnect from the internet or turn off the power during the installation. Wait for the HA installation to complete.

6. Wait for HA fully Started

After installation is complete, wait for Home Assistant (HA) to finish its first full startup. Following the on-screen prompts of iSG, use your computer's web browser to access Home Assistant.

In the lower left corner of the HA registration page, you will see the startup status of Home Assistant. Please wait for Home Assistant to complete its first startup.

Use your computer's web browser to access Home Assistant. and sign up HA