Z-Wave JS Ul
Last updated
Last updated
The iSG system version must be 20124 or higher.
You can refer to this guide for upgrading the iSG version: iSG firmware Updates.
You need to have a Z-Wave USB dongle.
Use the Serial Port Viewer Add-on to view the serial port information of the Z-wave USB dongle in the system and copy its Path information.
1）Turn on the iSG, and in the left navigation bar of the iSG, find "Add-Ons" → "ZWave-JS-Ul". Then click on "Install".
2）After the installation is successful, the service is default to being disabled. If you need to enable it, click on "Enable".
Turn on Auto Start Service. The plug-in service will be automatically started every time iSG restarts.
3）Access iSG ZWave-JS UI webpage in PC web browser by using URL shows on Add-on.
Go to Settings - Z-wave, input the Serial Port Path copied from Serial Port Viewer add-on, and click flash button to generate all keys, then click SAVE
4) Go to Control Panel, you should be able to see the Z-wave dongle you have added. Click the dongle infomation section to see the detail
5) Add Z-wave device in webpage, click right bottom manue and click manage nodes
6) Add to Home Assistant, Go to Settings - Home Assistant, enable WS Server and keep the Serier Port 3000.
7) Login to iSG built in Home Assistant, Go to Settings - Device & Services - ADD Integration, search Z-wave, Click Z-wave.
Input URL, ws://127.0.0.1:3000, then submit
8) You can now see the Z-wave intergration in the list
9) Click Configure to add Z-wave devices
10) Add Z-wace JS to Home Assistant Side bar, Click Settings - Dashboards - Add Dashboard, Input Title and choose the icon, then Creat dashboard.
Go to Side Bar, Choose Z-wave JS, click add card, choose Webpage
Input URL, http://Your iSG IP:8091, sand Save
