Zigbee2MQTT

With this Add-on, it can better support the setup of Zigbee devices from different brands and categories to iSG.

1. Prerequisites:

1)Zigbee Upgrade

2)Remove the ZHA integration installed in Home Assistant in iSG.

3)Restart iSG

4)Go to iSG Add-on, find MQTT Broker add-on and enter the username and password you want for the MQTT service..

2. Install and configure Zigbee2MQTT

1)Install Zigbee2MQTT

2)Configure Zigbee2Mqtt

Note: After you enter the information in the configuration pop-up window, click Save. If the content you entered is not displayed, please click Enter again.

  • Original iSG

  • iSG MAX

3)Enable Service and Auto Start Service

4)Use PC web browser and enter iSG IP:8080

5) Configure Zigbee2MQTT in the web page

  • Make sure Zigbee2Mqtt is Not in Join Status

  • Enter Settings - Home Assistant integration

  • Choose Home Assistant (advanced)

  • Input Home Assistant Status topic: hass/status

  • Click Submit

3. Configure HA MQTT Integration

1)In HA settings - Devices & Services - Add integration, search MQTT and add to HA.

2)Click CONFIGURE MQTT

3)Click RE-CONFIGURE MQTT

4)Fill in the Broker information from iSG Mqtt Broker add-on into here

4. Add Zigbee devices in HA

After the MQTT Integration is configured, please come back to Zigbee2MQTT page. Click "Permit join (All)" and reset your Zigbee device. The Zigbee2MQTT service will automatically discover the device and let it join in.

Now, return to Home Assistant and navigate to Devices page, you will find the Zigbee device automatically shows up.

5. Add devices to iSG

Go to iSG - Devices - Add Device - Home Assistant, choose devices and add to iSG

Last updated